Wholesale Dip LED Module Factories – Indoor P1.3 HD LED Display Module – Jucai

Remarks

1.Indoor Q1.3 Pro module is fine pixel LED module, so we suggest to go with MG cabinet, cabinet model is QM-Pro-1.
2.For Indoor Q1.3 Pro LED module, we also have aluminum shell Q1.3 Pro-MAX solution for choice. For details, please check with our sales.
3.Indoor Q1.3 Pro uses HUB320, and there is only input port, not output port.
4.Temperature requirement:

• 1) Storage temperature range: -10℃-30℃, over 30℃ needs to do cooling treatment.
• 2) Lamp surface temperature(working period): ≤60℃, temperature control equipment is required to be installed when temperature exceeds the standard.

5.Humidity requirement:

• Storage humidity range: 10% RH-60% RH, humidity over 60% RH requires dehumidification treatment.

6.Keep away from water: Indoor products have low level of protection, water can make the module short circuit, and leads to circuit device damage, so it is necessary to keep away from the water source.
7.Electro-static protection: The worker must wear an anti-electrostatic wrist strap and anti- electrostatic glove. Various tools must be strictly grounded during assembly.
8.The unit board and the box can be spliced arbitrarily in the horizontal and vertical directions to form different sizes of displays
9.If there is any dripping on the drip position of the product that needs to be cleaned with alcohol to prevent the product from being damaged due to liquid corrosion;

Application

Q1.3 Pro, Court Meeting Room, 8sqm