Wholesale Digital LED Panel Products – Indoor P1.3 Gold Wire HD LED Display Module – Jucai

Remarks & Key Precautions

1.Indoor S1.3 module is fine pixel LED module, so we suggest to go with MG cabinet, cabinet model is QM-Pro-1.
2.Indoor S1.3 uses HUB320, and there is only input port, not output port.
3.S series LED module use gold wire LED lamp and high refresh rate IC.
4.Temperature requirement:

• 1) Storage temperature range: -10℃-30℃, over 30℃ needs to do cooling treatment.
• 2) Lamp surface temperature(working period): ≤60℃, temperature control equipment is required to be installed when temperature exceeds the standard.

5.Humidity requirement:

• Storage humidity range: 10% RH-60% RH, humidity over 60% RH requires dehumidification treatment.

6.Keep away from water: Indoor products have low level of protection, water can make the module short circuit, and leads to circuit device damage, so it is necessary to keep away from the water source.
7.The module cannot be directly connected to 220V, and the module’s positive and negative poles connection must be right.
8.in order to ensure the normal lighting and work of the screen body, the switch power supply, the box body and the installation structure frame used by the screen body shall be properly connected to prevent the occurrence of dangerous accidents such as battery leakage or electric shock caused by faulty grounding.
9.In order to ensure the service life of the LED, please do not display only static images or static texts for a long time, which may cause serious attenuation of the lamp brightness or cause batch dead lights. Please play scrolling images or texts.

Application

S1.3, Shopping Mall, 7sqm