High Quality Pixel Pitch LED Screen Supplier – Indoor P1.5 Gold Wire HD LED Display Module – Jucai

Remarks & Key Precautions

1.Indoor S1.5 module is fine pixel LED module, so we suggest to go with MG cabinet, cabinet model is QM-Pro-1.
2.Indoor S1.5 uses HUB320, and there is only input port, not output port.
3.S series LED module use gold wire LED lamp and high refresh rate IC.
4.Temperature requirement:

• 1) Storage temperature range: -10℃-30℃, over 30℃ needs to do cooling treatment. Lamp surface temperature(working period): ≤60℃, temperature control equipment is required to be installed when temperature exceeding the standard.

5.Humidity requirement:

• Storage humidity range: 10% RH-60% RH, humidity over 60% RH requires dehumidification treatment.

6.Keep away from water: Indoor products have low level of protection, water can make the module short circuit, and leads to circuit device damage, so it is necessary to keep away from the water source.
7. necessary to keep away from the water source. Do not throw, push, squeeze or press the module, avoid damaging the display screen.
8.in the range of 10% ~ 65%RH relative humidity, it is recommended to open the display screen once a day, and use it normally for more than 4 hours to remove the humidity on the display screen
9.in the process of use and transportation, do not fall, push, squeeze, pressure unit plate, in order to avoid damage to the display screen

Application

S1.5, Company Meeting Room, 5sqm