High Quality Electronic LED Screens Suppliers – Indoor P2.5 High Refresh Rate LED Display Module – Jucai

Remarks & Key Precautions

1.Indoor Q2.5 Pro can go with 640*480mm MG cabinet, cabinet model is QM-Pro-2.
2.Indoor Q2.5 Pro uses HUB75E.
3.Temperature requirement:

• 1) Storage temperature range: -10℃-30℃, over 30℃ needs to do cooling treatment. Lamp surface temperature(working period): ≤60℃, temperature control equipment is required to be installed when temperature exceeding the standard.

4.Humidity requirement:

• Storage humidity range: 10% RH-60% RH, humidity over 60% RH requires dehumidification treatment.

5.Keep away from water: Indoor products have low level of protection, water can make the module short circuit, and leads to circuit device damage, so it is necessary to keep away from the water source.
6.If the product has been stored for more than one month, need to do 6 hours of aging test before it can be used. The aging mode is: 10%Full brightness setting-1H, 30%Full brightness setting-1H, 60%Full brightness setting-2H, 80%Full brightness setting-1H, 100%Full brightness setting-1H (increase brightness gradually in aging test)
7.before the maintenance of the display, it is necessary to turn off the main power of the screen before the operation.
8. People who come into contact with the product must wear an electrostatic wristband and electrostatic gloves, and all electric tools used in the maintenance and installation process must be strictly grounded.

Application

Q2.5 Pro, Stage, 120sqm