High Quality Advertising Full Color LED Module Suppliers – Indoor P1.8 LED Display Module – Jucai

Remarks & Key Precautions

1.For indoor Q1.8 E, pixel is relative small, we suggest to go with 640*480mm MG cabinet, cabinet model is QM-Pro-2.
2.Indoor Q1.8 E uses HUB75E port, and there is only input port, not output port.
3.Temperature requirement:

• Storage temperature range: -10℃-30℃, over 30℃ needs to do cooling treatment. Lamp surface temperature(working period): ≤60℃, temperature control equipment is required to be installed when temperature exceeding the standard.

4.Humidity requirement:

• Storage humidity range: 10% RH-60% RH, humidity over 60% RH requires dehumidification treatment.

5.Indoor products have low level of protection, water can make the module short circuit, and leads to circuit device damage, so it is necessary to keep away from the water source.
6.special environment (1, seaside, swimming pool, bathing room, basement, tunnel; 2, chemical environment, vulcanization environment, halogen environment; 3, dust, dusty environment; 4, strong ultraviolet environment; 5 , the environment of strong electromagnetic fields; To measure brightness, the light gun must be aligned with the screen. It is best to measure the light gun to be level with the screen. Make sure that the black position of the observation window covers more than 16 pixels. Adjust the focus to measure.
7.can be used for indoor rental, and supports installation methods such as fixing, lifting and wall mounting to meet the needs of various indoor installation environments.

Application

Q1.8 E, Middle School, 24sqm