Outdoor P2.5 High Refresh Rate LED Display Module

Short Description:

Main Specification
Pixel Pitch: 2.5mm
Module Size: 320*160 mm
Resolution: 128*64dots
LED: SMD1515
Brightness: ≥4500nits
Max Current: ≤7.37 A
Pixel Density: 160000dots/㎡
Refresh Rate: ≥3840Hz
Port: HUB75E


Product Detail

Product Tags

Remarks & Key Precautions

1.Outdoor Q2.5 Pro is relative small pixel, we suggest to go with 960*960 outdoor MG cabinet.
2.All outdoor Q-Pro modules use HUB75
3.Temperature requirement:

  • 1) Operating temperature range: -20 ° C -40 ° C, other temperature range, need to install temperature control equipment.
  • 2) Lamp surface temperature (working time): ≤85°C, temperature control equipment is required to be installed when temperature exceeding the standard

4.Metal components of the screen, the shell of power supply and the cabinet should be grounded well, and the grounding resistance should be less than 10Ω. Prevent electrostatic damage to electronic devices in humid environment, while avoiding electric leakage to harm human body.
5.It’s not recommended that customer install module in outdoor environment with magnetic method. For it will cause the following hazards:

  • Rain or snow can enter from the screen front side to the screen back side, it may cause the electronic components, system card, power supply and cables be corroded and lose efficacy.
  • The magnetic installation method cannot guarantee the flatness and the performance of the LED screen.
  • Module is likely to deform under extremely cold weather.

6.Metal components of the screen, the shell of power supply and the cabinet should be grounded well, and the grounding resistance should be less than 10Ω. Prevent electrostatic damage to electronic devices in humid environment, while avoiding electric leakage to harm human being.
7.Temperature and humidity meters should be equipped on the installation site to monitor the surrounding environment of the screen in time. After heavy rain, it is necessary to check whether there are any problems such as dampness, water droplets and over humidity in the screen in time.
8.Temperature and humidity meters should be equipped on the installation site to monitor the surrounding environment of the screen in time.
9.Each group of 220V power line (2.5mm2 copper wire) into the line is only allowed to carry a maximum of 3 boxes, and each group of network connection line into the line according to the actual configuration of the system card parameters.

Application

Q2.5 Pro, Company Sign, 25sqm

Q2.5 Pro, Company Sign, 25sqm

Q2.5 Pro, Taxation Administration, 4.6sqm

Q2.5 Pro, Taxation Administration, 4.6sqm


  • Previous:
  • Next: