Indoor P2 Gold Wire High Refresh Rate LED Display Module

Short Description:

Main Specification
Pixel Pitch: 2mm
Module Size: 320*160mm
Resolution: 160*80dots
LED: SMD1515(gold wire)
Brightness: ≥700nits
Max Current: ≤5 A
Pixel Density: 250000 dots/㎡
Refresh Rate: ≥3840Hz
Port: HUB75E

Product Detail

Product Tags

Remarks & Key Precautions

1.For indoor S2, pixel is relative small, we suggest to go with 640*480mm MG cabinet, cabinet model is QM-Pro-2.
2.Indoor S2 uses HUB75E, and there is only input port, not output port.
3.S series LED module use gold wire LED lamp and high refresh rate IC.
4.Temperature requirement:

  • Operating temperature range: -20℃-40℃ other temperature range, need to install temperature control equipment.
  • Lamp surface temperature(working period): ≤60℃, temperature control equipment is required to be installed when temperature exceeding the standard.

5.Humidity requirement:

  • Storage humidity range: 10% RH-60% RH, humidity over 60% RH requires dehumidification treatment.

6.Keep away from water: Indoor products have low level of protection, water can make the module short circuit, and leads to circuit device damage, so it is necessary to keep away from the water source.
7.After heavy rain, it is necessary to check whether there are any problems such as dampness, water droplets and over humidity in the screen in time.
8.there should be no sweat or other liquid dripping on the display screen during disassembly and assembly work. the process of use and transportation, do not fall, push, squeeze, pressure unit plate, in order to avoid damage to the display screen


S2, Showroom, 37.85sqm

S2, Showroom, 37.85sqm

  • Previous:
  • Next: